It is basically proposed for utilization in welded pressure vessels where indent durability is important. These evaluations cover a scope of rigidities from 55 - 90 Mpa and this flexibility clarifies a great part of the particulars ubiquity.
For plates more slender than 40mm ordinarily supply as rolled. Plates over 40mm thick are standardized. For A 516 grade 70, which is one of most well known steels, the ASME standard organization is as per the following (reliant on evaluation):
ASTM A516 Standard steel plates are planned for utilization in pressure vessels where expanded quality is important.
ASTM A516 CHEMICAL COMPOSITION CAST ANALYSIS
|C||Mn||P max||S max||Si max|
|t < 12.5
|12.5mm < t =50mm||50mm < t ≤ 100mm||100mm < t ≤ 200mm||t < 200
| t < 12.5
|A516 Grade 55||0.18||0.2||0.22||0.24||0.26||06-09||0.55-0.98||0.035||0.035||0.15-0.4|
|A516 Grade 60||0.21||0.23||0.25||0.27||0.27||06-09||0.85-1.2||0.035||0.035||0.15-0.4|
|A516 Grade 65||0.24||0.26||0.28||0.29||0.29||0.85-1.2||0.85-1.2||0.035||0.035||0.15-0.4|
|A516 Grade 70||0.27||0.28||0.3||0.31||0.31||0.85-1.2||0.85-1.2||0.035||0.035||0.15-0.4|
ASTM A516 MECHANICAL PROPERTIES
|Tensile Strength (ksi)||Tensile Strength (MPa)||Yield Strength (ksi)||Yield Strength (MPa)||Elongation in 200mm(%)||Elongation in 50mm(%)|
|A516 Grade 55||55-75||380-515||30||205||23||27|
|A516 Grade 60||60-80||415-550||32||220||21||25|
|A516 Grade 65||65-85||450-585||35||240||19||23|
|A516 Grade 70||70-90||485-620||38||260||17||21|
ASTM A516 Mechanical Properties When the thickness is less than 5/16 in(8mm), See Specification A20/A20M for elongation adjustment.
We can supply:
Thickness: From 5mm to 150mm
Width: From 1,500mm to 2,500mm
Length: From 6,000mm to 12,000mm